HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Defining P6000 Cluster Extension configuration information using the GUI
To define configuration information using the GUI:
1. Open the configuration tool.
For instructions, see “Starting the P6000 Cluster Extension configuration tool” on page 26.
2. Click Add in the P6000 Management Server Configuration section to open the Add P6000
Management Server (SMA) dialog box.
3. Enter the following values in the appropriate fields, and then click OK:
• The name and IP address of the management server.
• The SSL setting. This value determines the default port number.
• The port number for HP SMI-S connections. Accept the default setting.
• The user name and password for HP SMI-S, which may be different from the actual host login
name and password.
4. Click Add in the Array Configuration section to open the Add Array dialog box.
The arrays managed by the management server entered in Step 3 are listed.
5. Select the arrays that present disks to cluster nodes, and then click OK.
HP P6000 Cluster Extension Software Administrator Guide 27