HP P6000 Cluster Extension Software Administrator Guide (5697-0986, June 2011)

Fibre Channel A data transfer architecture designed for mass storage devices and other
peripheral devices that require high bandwidth.
full copy The process of copying all data written on a source virtual disk directly to the
destination virtual disk. If a data block contains all zeros, a zeroing message is
sent to the destination array's virtual disk for the corresponding data block. This
minimizes the amount of data that must be written to the destination virtual disk.
When a full copy is complete, the source and destination virtual disks contain
the same data (synchronized).
GB Gigabyte. A unit of storage, abbreviated as G or GB, equal to 1,024 Megabytes.
GUI Graphical User Interface.
HBA Host bus adapter.
heartbeat A periodic synchronization signal issued by cluster software or hardware to
indicate that a node is an active member of the cluster.
high availability
(HA)
Redundant systems, software, and information technology processes to reduce
the risk of downtime. No single point of failure.
home A DR group that is the preferred source in a replication relationship. By default,
home is the original source, but it can be set to the destination DR group.
host A computer that runs user applications and uses (or potentially uses) one or more
virtual disks that are created and presented by the array controller.
HSV Hierarchical Storage Virtualization. The name given to the virtualization controller
architecture.
iLO Integrated Lights Out
ISL Intersite link or interswitch link. The abbreviation is context sensitive.
JRE Java Runtime Environment.
leveling Distribution of all user data within the virtual disks across all physical disks within
the disk group.
local site Controller pair residing at the data center that contains the source data. A storage
system may be considered a primary site for some vdisks and an alternate site
for other vdisks.
See also primary site
log Storage that is used for logging.
logging Usually context-sensitive. In HP P6000 Continuous Access, logging refers to the
history of host write commands (and data) when the destination array is not
accessible. If failsafe mode is enabled, logging does not occur.
LU Logical unit.
LUN Logical unit number.
LVM Logical Volume Manager.
Glossary114