HP EVA Cluster Extension Software Administrator Guide (5697-2445, July 2013)
4. Modify the parameters as required, and then click OK.
NOTE: In the case of a CSV disk, the HP EVA CLX Settings tab in the properties window is visible
only if that CSV disk is dependant on a "Cluster Extension EVA" resource.
Alternatively, you can use HP EVA Resource Configuration Tool (ClxevaResConfig.exe) to
configure the CLX resource on which the CSV is dependent.
Using the resource configuration tool to set resource properties (Server Core and Hyper-V Server)
For Server Core or Hyper-V Server, use the HP EVA CLX resource configuration tool to set resource
properties. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on
a remote management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure Cluster Extension EVA
resource properties from a remote management station or through the CLI, the properties you
enter are not validated.
To use the resource configuration tool:
1. Open a command window and enter CLXEVARESCONFIG.EXE.
2. Select the resource you want to change in the EVA CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring Cluster Extension EVA resources 29