HP EVA Cluster Extension Software Administrator Guide (5697-2445, July 2013)

standalone resource configuration utility in Server Core or Hyper-V Server. For instructions on using
the available GUI options, see the following sections:
• “Using Failover Cluster Management to set resource properties (Windows Server 2008/2008
R2/2012)” (page 27)
• “Using the resource configuration tool to set resource properties (Server Core and Hyper-V
Server)” (page 29)
NOTE: When you click OK or Apply on the HP EVA CLX Settings tab or resource configuration
tool, your changes are saved, the connections to the configured management servers are checked,
and the connections from each management server to the configured EVA arrays are checked. If
these connection tests fail, a warning message appears.
TIP: For information on managing Cluster Extension EVA resources from a remote management
station through the MMC, see “Setting Cluster Extension EVA resource properties using the MMC”
(page 35).
Using Failover Cluster Management to set resource properties (Windows Server 2008/2008
R2/2012)
For Windows Server 2008/2008 R2, use the Failover Cluster Management GUI to set resource
properties.
1. Open Failover Cluster Management.
2. Double-click the Cluster Extension EVA resource in the summary pane to open the Properties
window.
3. Click the HP EVA CLX Settings tab.
4. Make the necessary parameter changes, and then click OK.
Configuring Cluster Extension EVA resources 27