HP EVA Cluster Extension Software Administrator Guide (5697-2445, July 2013)

Defining HP EVA Cluster Extension configuration information using the GUI
To define configuration information using the GUI:
1. Open the configuration tool.
For instructions, see “Starting the HP EVA Cluster Extension configuration tool” (page 17).
2. Click Add in the EVA Management Server Configuration section to open the Add HP EVA
Management Server (SMA) dialog box.
3. Enter the following values in the appropriate fields, and then click OK:
The name and IP address of the management server.
The SSL setting. This value determines the default port number.
The port number for HP SMI-S connections. Accept the default setting.
The user name and password for HP SMI-S, which may be different from the actual host
login name and password.
4. Click Add in the Array Configuration section to open the Add Array dialog box.
The arrays managed by the management server entered in Step 3 are listed.
5. Select the arrays that present disks to cluster nodes, and then click OK.
Configuring HP EVA Cluster Extension 19