HP 3PAR StoreServ Cluster Extension Software Administrator Guide

You can display all attributes of the HP 3PAR StoreServ Cluster Extension resource clx_fileshare
with the following command:
cluster resource clx_fileshare /privprop
The following example sets the UseNonCurrentDataOk property for the resource
clx_fileshare to NO:
cluster resource clx_fileshare /privprop UseNonCurrentDataOk=NO
For more information on the available properties, see “User configuration file and HP 3PAR StoreServ
Cluster Extension objects” (page 57).
The following example changes the name of the resource 3PAR Cluster Extension
resource1 to 3PAR Cluster Extension resource2:
cluster resource "3PAR Cluster Extension resource1" /ren:"3PAR Cluster
Extension resource2"
Setting HP 3PAR StoreServ Cluster Extension resource properties using the Microsoft
Failover PowerShell Cmdlets
The cluster commands in this section can be used with Windows Server 2008/2008 R2/2012/
2012 R2, Server Core, or Hyper-V Server. The Windows cluster default properties for a resource
can be changed using the command: Get-ClusterResource "resource_name" |
Set-ClusterParameter -Name "property_name" -Value "value_to_set"
NOTE: When you configure HP 3PAR StoreServ Cluster Extension resource properties using the
PowerShell, the properties you enter are not validated, so you must enter the property values
accurately, and verify them against the HP 3PAR StoreServ Cluster Extension documentation.
The following example sets the UseNonCurrentDataOk property for the resource
clx_fileshare to NO
Get-ClusterResource "clx_fileshare" | Set-ClusterParameter -Name
"UseNonCurrentDataOk" -Value NO
For more information on the available properties, see “User configuration file and HP 3PAR StoreServ
Cluster Extension objects” (page 57)
Setting HP 3PAR StoreServ Cluster Extension properties using a UCF
You can use a UCF to configure certain HP 3PAR StoreServ Cluster Extension properties. Properties
that you can configure in a UCF include:
• LogLevel
• ClusterNotifyCheckTime
• ClusterNotifyWaitTime
• StatusRefreshTime
• HP3PARCLICommandTimeout
• HP3PARCLIRetryCount
IMPORTANT: If you plan to use the default values for these properties, no UCF is required.
To configure properties using a UCF:
1. Take the HP 3PAR StoreServ Cluster Extension resource offline.
2. Open the sample UCF.cfg file located in %ProgramFiles%\Hewlett-Packard\Cluster
Extension 3PAR\sample.
44 Configuring HP 3PAR StoreServ Cluster Extension