HP 3PAR StoreServ Cluster Extension Software Administrator Guide

b. Select a cluster node from the Pre-Configured host list.
c. Assign the cluster node to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a cluster node, select the node, and then click Remove.
3. To modify a cluster node, select the node, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or click OK to save your
changes and close the Properties window.
Configuring HP 3PAR StoreServ Storage
To configure HP 3PAR StoreServ Storage from the cluster software Parameters tab or the resource
configuration tool:
1. To add a storage system:
a. Click Add to open the Add Array Data center Assignment window.
b. Select a storage system from the Storage System Name list.
c. Assign the storage system to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a storage system, select the storage system, and then click Remove.
3. To modify a storage system, select the storage system, and then click Modify.
4. Click Apply to finish your modifications and keep the window open, or click OK to save your
changes and then close the Properties window.
40 Configuring HP 3PAR StoreServ Cluster Extension