HP 3PAR StoreServ Cluster Extension Software Administrator Guide

Add-ClusterResource -Name "resource_name" -Group
“service_or_application_name” -ResourceType "Cluster Extension 3PAR"
Example:
This command adds an HP 3PAR StoreServ Cluster Extension resource called clx_fileshare
to the CLX_SHARE service or application.
Add-ClusterResource -Name "clx_fileshare" -Group “CLX_SHARE”
-ResourceType "Cluster Extension 3PAR"
Configuring more than one resource in a service or application
To create more than one HP 3PAR StoreServ Cluster Extension resource in a service or application:
1. Create two (or more) Remote Copy volume groups and create a resource for each Remote
Copy volume group.
2. Make every physical disk resource in the cluster service or application depend on both (all)
resources within the cluster service or application. This ensures that any disk in the cluster
service or application can go online only if both (all) Remote Copy volume groups are failed
over correctly.
Changing a HP 3PAR StoreServ Cluster Extension resource name
This section describes how to change a HP 3PAR StoreServ Cluster Extension resource name.
In this procedure, you use the Failover Cluster Management GUI to change a resource name. For
Server Core or Hyper-V Server, use the MMC or Powershell Cmdlets to run the Failover Cluster
Management GUI from a remote node or use cluster commands in the CLI to change the resource
name. See “Setting HP 3PAR StoreServ Cluster Extension resource properties using the CLI”
(page 43) or “Setting HP 3PAR StoreServ Cluster Extension resource properties using the Microsoft
Failover PowerShell Cmdlets” (page 44) for instructions.
1. Open Failover Cluster Management.
2. Open the resource Properties window and click the General tab.
3. Enter a new name in the Resource Name field.
4. Click OK to save your changes and close the window.
Configuring HP 3PAR StoreServ Cluster Extension resources
HP 3PAR StoreServ Cluster Extension resource properties are configured using the Failover Cluster
Management GUI, or cluster commands in the CLI.
• For information about Microsoft Failover Cluster Service properties that affect HP 3PAR StoreServ
Cluster Extension, see “Setting Microsoft cluster-specific resource and service or application
properties” (page 33).
• For information on HP 3PAR StoreServ Cluster Extension-specific properties, see “Setting HP
3PAR StoreServ Cluster Extension-specific resource properties” (page 36).
Before configuring HP 3PAR StoreServ Cluster Extension resources, review the HP 3PAR StoreServ
Cluster Extension objects described in “User configuration file and HP 3PAR StoreServ Cluster
Extension objects” (page 57).
NOTE: You do not have to configure resources of type "Cluster Extension 3PAR for VM
Management". Only resources of type "Cluster Extension 3PAR" needs to be configured for the
storage disks.
32 Configuring HP 3PAR StoreServ Cluster Extension