HP 3PAR StoreServ Cluster Extension Software Administrator Guide

If an array certificate that you are trying to cache as an exception file has already expired,
then CLX will not allow you to add the array certificate as an exception. This behavior is shown
in the following figure.
As a result, the password file is not generated.
5. Click Connect to connect to the array.
If the array certificate is not cached as an exception file, then the Connect operation prompts
you to add the certificate as an exception as described in the previous step.
The array details (Array Name, Array Serial Number, Array Model, and Array ID) and the
array target information appears on the Add Array dialog box.
NOTE: If the Remote Copy link is down between the array and the defined targets, Cluster
Extension will not be able to obtain the target array information. The value in the target array
ID will be NA and a warning message is displayed. However, you can continue with the array
configuration, but you cannot configure Cluster Extension resources for the volume groups
between the array and the failed targets. Verify the Remote Copy link between the array and
the failed targets. Launch the HP 3PAR StoreServ Cluster Extension Configuration Tool and
use the Modify array option, and click Connect on the Modify HP 3PAR StoreServ Storage
Connection Settings dialog to obtain the correct target information.
6. Click OK to add the array information into the cluster configuration.
The HP 3PAR StoreServ CLX Configuration Tool window appears.
7. Click Add in the Cluster Node Configuration section to open the Add Server dialog box.
The available servers are listed.
24 Configuring HP 3PAR StoreServ Cluster Extension