HP 3PAR StoreServ Cluster Extension Software Administrator Guide (5697-2894, December 2013)

4. Make the necessary parameter changes, and then click OK.
NOTE: HP 3PAR StoreServ CLX Settings tab in the properties window of a CSV disk is visible
only if that CSV disk is dependant on a "Cluster Extension 3PAR" resource.
Alternatively, you can also use HP 3PAR StoreServ Resource Configuration Tool
(Clx3PARResConfig.exe) to configure the CLX resource on which the CSV is dependent.
Using the resource configuration tool to set resource properties
To set CLX resource properties, you can also use the HP 3PAR StoreServ Cluster Extension resource
configuration tool. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on
a remote management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure HP 3PAR StoreServ
Cluster Extension resource properties from a remote management station or through the CLI,
the properties you enter are not validated.
To use the resource configuration tool:
36 Configuring HP 3PAR StoreServ Cluster Extension