HP 3PAR StoreServ Cluster Extension Software Administrator Guide (5697-2442, July 2013)

If the default values fit your environment, there is no need to specify them in the file.
COMMON
Format Tag
Description Distinguishes between general (common) and application-specific objects.
LogDir
Format String
Description (Optional) Defines the path to the HP 3PAR StoreServ Cluster Extension log file.
Default
value
%ProgramFiles%\Hewlett-Packard\Cluster Extension 3PAR\log
LogLevel
Format String
Description (Optional) Defines the logging level used by HP 3PAR StoreServ Cluster Extension.
Valid values error (default): Logs only error messages for events that are unrecoverable.
warning: Logs error messages and warning messages for events that are
recoverable.
info: Logs error messages, warning messages, and additional information, such
as disk status.
trace: Logs error messages, warning messages, info messages, and messages that
report on execution status, useful for troubleshooting.
HP3PARCLIRetryCount
Format Integer
Description Specifies the number of times that a HP 3PAR StoreServ CLI command is
retried on getting Too many CLI server connection error.
The retry count is used whenever HP 3PAR StoreServ Cluster Extension
communicates with the HP 3PAR StoreServ Storage. If the storage system
returns Too many CLI server connection error, then HP 3PAR
StoreServ Cluster Extension retries the same command for the configured
number of times.
Default value 3
NOTE: If the HP 3PAR CLI retry operation takes more time than the failover cluster resource
pending timeout value during the resource online operation, then Microsoft failover cluster
automatically moves the resource to failed state. As a result, CLX stops the HP 3PAR CLI retry
operation. After the resource failure, depending on the configured cluster resource properties,
failover cluster can restart the resource on the same node or on a different node.
There is no guarantee that CLX will succeed in performing the resource online operation at the end
of configured number of retry operation since HP 3PAR CLI continues to run the Too many CLI
Server connections error.
APPLICATION objects
The APPLICATION section defines the failback behavior of HP 3PAR StoreServ Cluster Extension
for each application service. APPLICATION is a multitag that can appear in the configuration file
for each application service using HP 3PAR StoreServ Cluster Extension.
APPLICATION objects 51