HP 3PAR Cluster Extension Software Administrator Guide (5697-2047, June 2012)

2. Select a volume group, and then click OK.
3. Click Apply to finish your modifications and keep the window open, or click OK to save your
changes and then close the Properties window.
Changing Remote Copy volume group settings
The cluster software resource configuration GUI and the resource configuration tool displays the
Remote Copy volume group name, replication mode, and replication status. Use the cluster software
Parameters tab or the resource configuration tool to edit the advanced Remote Copy volume group
settings to control failover behavior for the Remote Copy volume group that you use with HP 3PAR
Cluster Extension.
1. Click Advanced Settings.
The Advanced settings dialog box appears.
Use this dialog box to configure the Remote Copy volume group behavior.
• The settings in the Replication link up scenario section affect the failover behavior when
the HP 3PAR Remote Copy link is up.
• The settings in the Replication link down scenario section affect the failover behavior
when the HP 3PAR Remote Copy link is down.
2. Select RESYNCWAIT or FASTFAILBACK for the Application Startup Behavior.
3. If you selected RESYNCWAIT in Step 2, set the RESYNCWAIT timeout value.
• Enter the RESYNCWAIT timeout value, in seconds.
4. Select YES or NO as the Use non-current data OK value in the Replication link down scenario
section.
5. Enter the path of the application directory. The application directory is where HP 3PAR Cluster
Extension searches for application-specific files, such as the force flag or online file.
Setting HP 3PAR Cluster Extension-specific resource properties 35