HP 3PAR Cluster Extension Software Administrator Guide (5697-1429, March 2012)

b. Select a cluster node from the Pre-Configured host list.
c. Assign the cluster node to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a cluster node, select the node, and then click Remove.
3. To modify a cluster node, select the node, and then click Modify.
4. Click Apply to finish your modifications and leave the window open, or OK to save your
changes and close the Properties window.
Configuring HP 3PAR storage system
To configure HP 3PAR storage systems from the cluster software Parameters tab or the resource
configuration tool:
1. To add a storage system:
a. Click Add to open the Add Array Data center Assignment window.
b. Select a storage system from the Storage System Name list.
c. Assign the storage system to a data center selected from the Data center list.
d. Click OK to save and close the window.
2. To remove a storage system, select the storage system, and then click Remove.
3. To modify a storage system, select the storage system, and then click Modify.
4. Click Apply to finish your modifications and keep the window open, or click OK to save your
changes and then close the Properties window.
Selecting a volume group
Use the cluster software Parameters tab or the resource configuration tool to select the Remote
Copy volume group containing the disk that will be managed by the HP 3PAR Cluster Extension
resource.
1. Click Browse.
Setting HP 3PAR Cluster Extension-specific resource properties 33