HP 3PAR Cluster Extension Software Administrator Guide (5697-1429, March 2012)

Using the resource configuration tool to set resource properties (Server Core and Hyper-V Server)
To set resource properties for Server Core or Hyper-V Server, use the HP 3PAR Cluster Extension
resource configuration tool. When using the resource configuration tool:
• You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on
a remote management station.
• You cannot use the resource configuration tool to add or delete a resource.
• You can use the tool to configure multiple resources at one time. This saves time because you
can switch resources from the tool menu.
• The resource configuration tool is recommended for Hyper-V and Server Core environments
because the properties you enter are validated. When you configure HP 3PAR Cluster Extension
resource properties from a remote management station or through the CLI, the properties you
enter are not validated.
To use the resource configuration tool:
1. Open a command window and enter CLX3PARRESCONFIG.EXE.
2. Select the resource you want to change in the 3PAR CLX resource menu.
3. Make the necessary parameter changes, and then click OK.
Configuring cluster node data center assignments
To configure cluster node data center assignments from the cluster software Parameters tab or the
resource configuration tool:
1. To add a cluster node:
a. Click Add to open the Add Server Data center Assignment window.
32 Configuring HP 3PAR Cluster Extension for Windows