HP 3PAR Cluster Extension Software Administrator Guide (5697-0925, May 2011)

ClusterNotifyWaitTime
Format Integer
Description Specifies the amount of time that HP 3PAR Cluster Extension will monitor for VM live
migration state changes.
Default
value
5 seconds
DC_A_Hosts (Required)
Format List
Description This space-separated list defines the cluster nodes in data center A.
DC_B_Hosts (Required)
Format List
Description This space-separated list defines the cluster nodes in data center B.
DC_A_ InServStorage_SerNum (Required)
Format String
Description The serial number of the HP 3PAR storage system located in data center A.
DC_B_ InServStorage_SerNum (Required)
Format String
Description The serial number of the HP 3PAR storage system located in data center B.
RCVolumeGroupA (Required)
Format String
Description HP 3PAR Remote Copy volume group name on configured DCA HP 3PAR storage
system, containing the application service disk set.
RCVolumeGroupB (Required)
Format String
Description HP 3PAR Remote Copy volume group name on configured DCB HP 3PAR storage
system, containing the application service disk set.
NOTE: HP 3PAR Management Console will not provide details of RCVolumeGroupA and
RCVolumeGroupB. Use HP 3PAR CLI command showrcopy groups to find out the exact name
for RCVolumeGroupA and RCVolumeGroupB. For Example, for a group clx_vg_01 displayed
in the Management Console GUI, RCVolumeGroupA can be obtained from logging into DCA HP
3PAR storage system command line and executing the command showrcopy groups.
PostExecCheck (Optional)
Format String
Description The PostExecCheck object is used to configure HP 3PAR Cluster Extension to gather
3PAR virtual volumes status information after the takeover procedure. That information
will be passed to the post-executable. In case of a remote data center failure, it could
be time consuming to gather that information, especially if your post-executable does
not need any Remote Copy volume group status information. The arguments passed
to the post-executable will include only the local disk status if the PostExecCheck
object is set to NO.
APPLICATION objects 45