Connecting Your HP SureStore CD-Writer Plus Drive - C4358-90100
18
Installation Guide
System does not recognize the CD-Writer drive
■
In Windows 95,
simply click on the Connect or Disconnect
external drive icon on your desktop.
Select Shuttle EPAT External ATAPI Adapter
,
then click
Disconnect .
■
Restart your computer, or shut it down and then turn it on
again. Watch for the green light on the front of the CD-Writer
drive to blink as the computer boots up.
■
Make sure the CD-Writer drives cables are connected
properly.
■
See
"Check for a conflict with the parallel port (some other device
using the same IRQ or I/O as the parallel port)." on page 16
. For
example, a sound board or fax/modem board may be using
the same IRQ. If you discover a conflict(s), change the setting
on the other device. Refer to the manuals that came with your
computer and other devices for instructions.
■
The power supply should have a steady green light when
connected at both ends. If it is flashing, try a different power
outlet. If it is still flashing the power supply could be
damaged.