Connecting Your HP SureStore CD-Writer Plus Drive - C4358-90100

8
Installation Guide
If You Have Problems...
After connecting your CD-Writer drive and turning on your
computer, the computer should start (boot) as it normally does. If
it does not, check the following items:
■
Is the computer power plugged in?
■
Is each device plugged in and turned on?
■
Are all cables properly plugged into the back of your
computer and the CD-Writer drive?
■
Try turning off your computer. Wait at least 20 seconds before
turning it back on.
TIP: Save the original packaging materials, in case you need to
transport the drive or return any items to HP.
Using the CD-Writer drive on Another Computer
CAUTION: The CD-Writer contains sensitive, high-precision optical
equipment. Dropping or shaking the CD-Writer may cause damage to
these sensitive components. Please be careful when handling your drive.
You can disconnect the CD-Writer drive and move it to another
computer, as long as the other computer meets the minimum
requirements (see page 32).
The CD-Writer drive can be used by only one computer at a time.
Do not try to use the CD-Writer drive on more than one machine
by attaching it to a switch box.
To disconnect the CD-Writer drive:
1.
In Windows NT
, go to step 2.
In Windows 95,
click on the Connect or Disconnect external
drive icon on the desktop.
Select Shuttle EPAT External ATAPI Adapter
,
then click
Disconnect .