Safety and Regulatory Information - HP Carrier-Grade Server cc3310 (RSVLA-0301 and RSVLA-0301-DC)

HP Carrier-Grade Server cc3310 Safety and Regulatory Information
Safety and Regulatory Information
Chapter 1
4 English
Safety and Regulatory Information
Overview
Hewlett-Packard utilizes numerous marketing model numbers and nomenclature to identify server products.
Within a product family, the marketing model number typically identifies differences in the processor and I/O
options. A product family is defined as a group of products wherein the form, fit, function, and power
subsystem are essentially the same. Our practice is to assign a "regulatory model number" to a product family
to support monitoring and control of changes that potentially impact safety and EMC. The assigned
regulatory product numbers for this product is RSVLA-0301 and RSVLA-0301-DC. The regulatory product
numbers RSVLA-0301 and RSVLA-0301-DC are equivalent to the marketing designations referenced
throughout this document.Regulatory Compliance statements are required by some countries or areas for
international importation of the HP Carrier Grade Server.
Regulatory Information
For your protection, this product has been tested for conformance to various national and international
regulations and standards. The scope of this regulatory testing includes electrical and mechanical safety,
electromagnetic emissions, immunity, acoustics and hazardous materials.
When required, approvals are obtained from third party test agencies. Approval marks appear on the product
label. In addition, various regulatory bodies require some information under the headings listed in this
section.
Electrical Safety
Locate the AC outlet near the server! The AC power cords/cables are this product's main AC disconnect
devices and must be easily accessible at all times.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI card or Memory DIMM), you must
observe the following antistatic precautions to prevent damage. An ESD kit (HP Part Number A5201-68004)
is available. This kit contains one wrist strap, one conductive sheet, and one anti-static foam pad.
• Always disconnect power from the server and wear a grounded wrist strap when working around the
server. Always wear a grounded wrist strap when handling printed circuit boards.
• Treat all assemblies, components and interface connections as static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a minimum while removing or installing
boards, to minimize buildup of static charge.