UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc3300

HP cc3300 Carrier Grade Server Product Guide
74 Upgrading the Hardware
Removing and Installing Memory
The server board supports only PC133-compliant SDRAM. DIMMs must be the same speed. Install
from 128 MB to 6 GB of registered memory. DIMMs must be installed in pairs in the following
order: 1A-1B, 2A-2B, and 3A-3B as shown in Figure 16. The DIMM sockets are further identified
on the board’s silkscreen.
NOTE: It is recommended that HP tested memory is used when adding
memory capacity to the server.
OM11790
3A
1B
2B
3B
1A
2A
Figure 16. Installing DIMMs