UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc3300

HP cc3300 Carrier Grade Server Product Guide
30 Chassis Description
A 3.3v PCI riser card is installed in the server as a part of the standard configuration. Optional PCI
riser cards are also available. Refer to the following table for riser card details.
Table 7. HP cc3300 Carrier Grade Server PCI I/O Riser Card Details
Supported Card Dimensions Product
Number
Number of PCI I/O
Slots
Voltage Operation
(bits / MHz)
Full Length Half Length Low Profile Full Height
standard
configuration
3 3.3 volt 64/66, 64/33,
32/66, 32/33
No Yes Yes No
A6928A (3.3
volt Riser Card)
3 3.3 volt 64/66, 64/33,
32/66, 32/33
Yes Yes No Yes
A6929A (5 volt
Riser Card
3 5.0 volt 64/33, 32/33 Yes Yes No Yes
PCI I/O Cards
The following PCI cards are available for the cc3300 Carrier Grade Server.
I/O Card
Product
Number
3.3 volt,
5.0 volt, or
Universal
Full or Half
Length
Low Profile or
Full Height
Connector
Types
Factory
Integrate
Max Cards
Per hp
cc3300
Ultra 160 SCSI interface, low profile A6919A Universal Half length Low profile VHDCI
(VHDTS68)
Yes 2
Ultra 160 SCSI interface, full height A6919A opt.001 Universal Half length Full height VHDCI
(VHDTS68)
Yes 2
10/100BaseTX LAN Adapter, low profile A6920A Universal Half length Low profile RJ45 Yes 2
10/100BaseTX LAN Adapter, full height A6920A opt.001 Universal Half length Full height RJ45 Yes 2
Gigabit LAN Adapter over copper A6921A Universal Half Length Low Profile RJ45 Yes 2
Gigabit LAN Adapter over copper, full
height
A6921A opt 001 Universal Half length Full Heighte RJ45 Yes 2
Power Supplies
The power supply cage shown in Figure 8 is accessed from the rear of the chassis. The power
supply cage supports up to two hot-swap 350 W power supplies (either AC input or DC input) in a
(1 + 1) redundant configuration. A power supply filler module (shown at left in Figure 8) for the
empty power supply site is supplied for systems without redundancy.
Only the DC input version is NEBS certified.