UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc3300
HP cc3300 Carrier Grade Server Product Guide
POST Error Codes and Messages 103
Table 20. POST Code- Port 80h Codes (continued)
Post
Code Diagnostic LED Decoder
Description
MSB LSB
Note: G=Green, R=Red, A=Amber
95h R G Off A Lock out PS/2 keyboard/mouse if unattended start is enabled.
92h R Off G R Option ROM scan.
98h A Off Off R
Init Boot Devices: the adapter ROM had control and has now
returned control to BIOS POST Performing any required processing
after the option ROM returned control.
9Bh A Off G A
Float Processor Initialize: performing any required initialization
before the coprocessor test next.
9Eh A G G R
Enable Interrupts 0,1,2: checking the extended keyboard, keyboard
ID, and NUM Lock key next. Issuing the keyboard ID command next.
A2h R Off A Off Report second set of POST errors to error messenger.
86h R G G Off
Prepare And Run Setup: error manager displays and logs POST
errors. Waits for user input for certain errors. Execute setup.
8Bh A Off G G Set base expansion memory size.
8Ch A G Off Off Adjust Setup: programming the Setup options next.
A5h R G R G Set display mode.
A7h R G A G OEM Patch 12.
A7h R G A G Build SMBIOS table and MP tables.
A7h R G A G Program hot key and timeout settings in keyboard controller.
A7h R G A G Processor initialization before boot.
A7h R G A G Copy required language strings to shadow RAM.
AAh A Off A Off Clear video screen.
000h Off Off Off Off One beep to indicate end of POST. No beep if silent boot is enabled.
000h Off Off Off Off POST completed. Passing control to INT 19h boot loader next.
POST Codes and Error Messages
The following table defines POST error codes and their associated messages. The BIOS prompts
the user to press a key in case of a serious error. Some error messages are preceded by the string
"Error” to highlight that the system might be malfunctioning. All POST errors and warnings are
logged in the system event log unless it is full.
Table 21. POST Codes and Error Messages
Error Code Error Message Pause on Boot
8100 Processor 1 failed BIST No
8101 Processor 2 failed BIST No
8102 Processor 3 failed BIST No
8103 Processor 4 failed BIST No
8104 Processor 1 Internal error (IERR) No
8105 Processor 2 Internal error (IERR) No
8106 Processor 1 Thermal Trip error No
8107 Processor 2 Thermal Trip error No