UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc2300

78 cc2300 Carrier Grade Server Product Guide
Removing a Processor
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. Detach the heatsink-retaining clip from the processor socket using a screwdriver or other tool
as shown in Figure 21.
OM12827
Figure 21. Unlatching the Heatsink Retaining Clip (Shown from Power Supply Side)
3. Remove the heatsink from the processor.
4. Raise the locking bar on the socket as shown in Figure 22.
OM11788
Figure 22. Raising the Locking Bar on the Processor Socket
5. Remove the processor from the socket.
6. If you removed the processor from the secondary socket and are not replacing it, you must
install a terminator in its place.