UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc2300

cc2300 Carrier Grade Server Product Guide 73
Removing and Installing Memory
The server board supports only PC133-compliant SDRAM. DIMMS must be the same speed.
Install from 256 MB to 6 GB of registered memory.
DIMMs must be installed in pairs in the following order: 1A-1B, 2A-2B, and 3A-3B as shown in
Figure 17. The DIMM sockets are further identified on the board’s silkscreen.
It is recommended that HP tested memory is used when adding memory capacity to the server.
OM11790
3A
1B
2B
3B
1A
2A
Figure 17. Installing DIMMs