UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc2300

46 cc2300 Carrier Grade Server Product Guide
Onboard Video Function Submenu
Feature Option Description
Onboard SCSI [Enabled]
Disable
Allows disabling onboard Video port
Security Menu
You can make the following selections on the Security Menu itself. Enabling the Supervisor
Password field requires a password for entering Setup. The passwords are not case-sensitive.
Feature Option Description
User Password is
[Not Installed]
Installed
This field is informational only.
Administrator
Password is
[Not Installed]
Installed
This field is informational only.
Set Administrator
Password
<Enter> Controls access to the setup utility. When the <Enter> key is
pressed, you are prompted for a password, press the ESC key to
abort. Once set, this can be cleared by setting it to a null string, or
by using the clear-password jumper on server board.
Set User Password <Enter> Controls access to system boot. When the <Enter> key is pressed,
you are prompted for a password, press the ESC key to abort.
Also used to unlock the system when in the secure mode (secure
mode is indicated by blinking keyboard lights). Once set, this can
be cleared by setting it to a null string, or by using the
clear-password jumper on server board.
User Access Level
[Limited]
No access
View Only
Full
Limited: Allows access to certain fields only.
No Access: Allows no access to change or view fields.
View Only: Allows user to view fields but not change them.
Full: Allows user to view and change most fields.
Server Menu
Feature Option Description
► System Management
<Enter> Enters the System Management submenu.
► Console Redirection
<Enter> Enters the Console Redirection submenu.
► Event Log Configuration
<Enter> Enters the Event Log Configuration submenu.
Service Boot [Disabled]
Enabled
Enables the Service Boot option. Option
automatically resets to disabled on next system boot.
Assert NMI on PERR [Disabled]
Enabled
If enabled, NMI is generated. SERR option needs to
be enabled to activate this option.
Assert NMI on SERR [Enabled]
Disabled
If enabled, NMI is generated on SERR and logged.
BMC IRQ [Disabled]
IRQ5
IRQ11
Sets the BMC IRQ.
After Power Failure [Last State]
Stays Off
Power On
Determines the mode of operation if a power loss
occurs.
continued