UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc2300

cc2300 Carrier Grade Server Product Guide 43
The BIOS Setup program menu bar is shown below.
Main Advanced Security Server Boot Exit
Allocates
resources
for hardware
components.
Configures
advanced
features available
through the
chipset.
Sets
passwords
and security
features.
Selects serial port,
LAN, and event log
features. Also
permits service
boot.
Selects boot
options and
power
supply
controls.
Saves or
discards changes
to set program
options.
Main Menu
You can make the following selections on the Main Menu. Use the submenus indicated by “►” for
other selections.
Feature Option Description
System Time HH:MM:SS Sets the system time.
System Date MM/DD/YYYY Sets the system date.
Floppy A Not installed
[1.44/1.25 MB 3 ½]
2.88 MB 3 ½
Selects the diskette type. Note: The 1.25 MB
3 ½-inch references a 1024 Byte sector Japanese
media format. Support for the 1.25, 3 ½-inch format
requires a 3 ½ “3-mode” diskette drive.
Hard Disk Pre-Delay [Disabled]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Adds a delay before first access of the hard drive to
accommodate slow spin-up hard disk drives.
► Primary IDE Master
<Enter> Enters submenu.
► Primary IDE Slave
<Enter> Enters submenu.
► Processor Settings
<Enter> Enters submenu.
Language [English (US)]
Español (SP)
Deutsch (DE)
Italiano (IT)
Français (FR)
Selects which language BIOS displays.
Primary IDE Master and Primary IDE Slave Submenus
Feature Option Description
Type None
[Auto]
Select the type of device that is attached to the IDE channel.
If you select User, you will need to enter the parameters of
the IDE device (cylinders, heads and sectors).
LBA Mode Control N/A This field informational only.
Multi-Sector
Transfers
N/A This field informational only.
PIO Mode N/A This field informational only.
Ultra DMA N/A This field informational only.