UserÆs Guide and Technical UserÆs Guide - HP Carrier Grade Server cc2300

cc2300 Carrier Grade Server Product Guide 35
AC Input Voltage Specification
The power supply will operate within all specified limits over the input voltage ranges outlined in
Table 12. Harmonic distortion of up to 10% THD will not cause the power supply to go out of
specified limits.
Table 12. AC Input Rating
Parameter MIN RATED MAX
Max Input Current
(250 W Version)
Voltage (110) 90 V
rms
100-127 V
rms
140 V
rms
6.7 A
rms
Voltage (220) 180 V
rms
200-240 V
rms
264 V
rms
Frequency 47 Hz 63 Hz
DC Output Current Specifications
The combined output power of all outputs should not exceed 250 W. Each output has a maximum
and minimum current rating shown in Table 13. The power supply meets both static and dynamic
voltage regulation requirements for the minimum dynamic loading conditions. The power supply
meets only the static load voltage regulation requirements for the minimum static load conditions.
Table 13. 250 W Load Ratings
+3.3 V +5 V +12 V -12 V 5 VSB
PEAK (10sec) 30A
MAX 20A 20A 25A 0.5A 1.5A
MIN DYNAMIC 2.0A 2.0A 1.5A 0A 0A
MIN STATIC 1A 1A 0A 0A 0A
NOTE
The maximum combined power of the 3.3 V and 5 V outputs is 150 W.
Peripheral Bay
The peripheral bay provides support for one removable media device, which can be one of the
following devices.
• ½-inch (slimline) CD-ROM drive, or
• ½-inch (slimline) floppy drive (optional)
SCSI Hard Drive Bay 1 and 2
The hard drive tray supports two 3.5-inch x 1.0-inch Ultra160 SCSI technology hard disk drives
(non-SCA). The hard drive tray accepts 15K RPM (and below) hard drives that consume up to
18 Watts of power.