Safety and Regulatory Information - HP Carrier-Grade Server cc3310 (RSVLA-0301 and RSVLA-0301-DC)

HP Carrier-Grade Server cc3310 Safety and Regulatory Information
Safety and Regulatory Information
Chapter 1
English 7
Cabinet Safety Precautions
WARNING Cabinets are heavy even when empty. Exercise caution when moving cabinets
whether equipment is installed in the cabinet or not. Avoid rolling cabinets on rough
or uneven surfaces or inclines greater than 10 degrees. Unloading cabinets from the
pallet and movement of cabinets should be performed by at least two people.
WARNING Slideable products are not to be extended from the cabinet while the equipment is
on the shipping pallet. The cabinet must be unloaded from the pallet and both front
and rear anti-tip feet properly installed prior to extending any slideable product.
WARNING Once installed, both the front and rear anti-tip feet must remain in place to maintain
stability. Only one slideable product must be extended at a time.
WARNING Use of any slide mount product requires the installation of a cabinet anti-tip device.
The anti-tip device for the following cabinet products is a pair of anti-tip feet:
A4900A, A4901A, A4902A, A5134A, A5135A, A5136A, J1500A/B, J1501A/B, and
J1502A/B. Additional anti-tip feet information is located at
http:// www.h p.com/rac ksolutio ns
Install both front and rear anti-tip feet on the cabinet before installing any slide
mount product.
Before installing this product in any HP rack, you must install an anti-tip stabilizer
kit and ballast kit.
Failure to follow these precautions can result in damage to equipment or injury to
personnel