- HP All-in-One Printer Manual

48 Printer operation Q2431-90912

RET OFF

LIGHT

*MEDIUM

DARK

Use the Resolution Enhancement technology (REt)

setting to produce print with smooth angles, curves,

and edges.

REt does not affect print quality if the print resolution

is set to FastRes 1200. All other print resolutions

benefit from REt.

Note

It is best to change the REt setting in the software

program or the printer driver. (Program and

printer-driver settings override control-panel settings.)

ECONOMODE *OFF

Turn EconoMode ON (to save toner) or OFF (for high

quality).

EconoMode creates draft-quality printing by reducing

the amount of toner on the printed page.

Note

It is best to turn EconoMode on or off in the software

program or the printer driver. (Program and printer

driver-settings override control-panel settings.)

CAUTION

HP does not recommend full-time use of EconoMode.

If EconoMode is used full-time, it is possible that the

toner supply will outlast the mechanical parts in the

print cartridge.

TONER DENSITY 1

Lighten or darken the print on the page by setting the

toner density. Select a setting from 1 (light) to

5 (dark). The default setting of 3 usually produces the

best results.

Note

It is best to change the toner density in the software

program or the printer driver. (Program and

printer-driver settings override control-panel settings.)

CREATE CLEANING PAGE No value

available.

Press the S

ELECT ( ) button to print a cleaning page

manually (for cleaning toner from the fuser). Open the

rear output bin. Follow the instructions on the

cleaning page.

Table 23. Print quality submenu (continued)

Item Values Explanation