- HP All-in-One Printer Manual

46 Printer operation Q2431-90912
Print Quality submenu
Some items on this menu are available in the software program or the printer driver (if the
appropriate driver is installed). Program and printer-driver settings override control-panel
settings. For more information, see the HP LaserJet 4200/4300 Use Guide. In general, it is best
to change these settings in the printer driver, if applicable.
The following section lists the settings and their possible values in the Print Quality
submenu.The default value for each setting is the one that has an asterisk (*) next to it.
SYMBOL SET *PC-8
Several
Use this item to select any one of several available
symbol sets at the printer control panel. A symbol set
is a unique grouping of all the characters in a font. PC-
8 or PC-850 is recommended for line-draw characters.
APPEND CR TO LF *NO
YES
Select YES to append a carriage return to each line
feed that is encountered in backward-compatible PCL
jobs (pure text, no job control). Some environments,
such as UNIX, indicate a new line using only the
line-feed control code. Use this item to append the
required carriage return to each line feed.
Table 23. Print quality submenu
Item Values Explanation
SET REGISTRATION No value
available.
Use this item to shift the margin alignment to center
the image on the page from top to bottom, and from
left to right. You can also align the image that is
printed on the front with the image that is printed on
the back.
PRINT TEST PAGE
● SOURCE
● ADJUST TRAY [N]
X1 Shift
X2 Shift
Y Shift
● SOURCE
ALL TRAYS
TRAY 1
*TRAY 2
TRAY [N]
Use this item to select the tray from which you want to
print the test page. If installed, optional trays appear
as selections, where [N] is the number of the tray.
● ADJUST TRAY
[N]
X1 Shift
X2 Shift
Y Shift
-20 to 20 (*0)
Use this item to set the registration for the specified
tray, where [N] is the number of the tray. A selection
appears for each tray that is installed, and registration
must be set for each tray.
X1 SHIFT: Registration of the image on the page from
side to side, as the media lies in the tray. For
duplexing, this side is the second side (back) of the
page.
X2 SHIFT: Registration of the image on the page from
side to side, as the media lies in the tray, for the first
side (front) of a duplexed page.
Y SHIFT: Registration of the image on the page from
top to bottom, as the media lies in the tray.
Table 22. PCL submenu (continued)
Item Values Explanation