- HP All-in-One Printer Manual
Q2431-90912 Chapter 7 Troubleshooting 293
68.X
PERMANENT STORAGE FULL
For help press
alternates with
68.X
PERMANENT STORAGE FULL
To continue press
A nonvolatile storage device is
full. Pressing the S
ELECT ()
button should clear the message.
Printing can continue, but behave
unexpected in response to the
changed settings.
X Description
0 onboard NVRAM
1 flash DIMM or hard drive
1. Press the S
ELECT ( ) button
to continue.
2. For 68.0 errors, turn the
printer off and then on.
3. If a 68.0 error persists,
Initialize NVRAM. See the
caution and note in “To
initialize NVRAM” on
page 251.
4. For 68.1 errors, use the
HP Web Jetadmin software to
delete files from the disk
drive.
5. If this error message persists,
replace the formatter
assembly. See “Formatter
assembly” on page 161.
6. If the 68.1 error persists,
reinitialize the hard disk. See
the caution and note in “To
initialize the hard disk” on
page 252.
7. If the 68.1 error persists,
replace the disk.
68.X
PERMANENT STORAGE WRITE FAIL
To continue press
A nonvolatile storage device is
failing to write. Pressing the
S
ELECT ( ) button should clear
the message. Printing can
continue, but behave unexpected
in response to the changed
settings.
X Description
0 onboard NVRAM
1 removable disk (flash or hard)
1. Press the S
ELECT ( ) button
to continue.
2. Turn the printer off and then
back on.
3. If the 68.0 error persists,
initialize the NVRAM. See the
caution and note in “To
initialize NVRAM” on
page 251.
4. If this error message persists,
replace the formatter
assembly. See “Formatter
assembly” on page 161.
5. For a 68.1 error message
reinitialize the hard disk. See
the caution and note in “To
initialize the hard disk” on
page 252.
6. If the 68.1 error persists,
replace the disk.
69.X
PRINTER ERROR
To continue turn off then on
The optional duplexer is not
functioning.
1. Remove the duplexer.
2. Turn the printer off and then
on.
3. Replace the duplexer.
4. If the message persists,
replace the duplexer.
Table 42. Numerical printer messages (continued)
Message Description Action