- HP All-in-One Printer Manual
Q2431-90912 Chapter 7 Troubleshooting 269
STAPLER LOW ON STAPLES
For help press
Note:
The stapler/stacker LED is
continuously illuminated green (this
error applies to the stapler/stacker
only).
Fewer than 70 staples remain in
the optional stapler/stacker staple
cartridge. Printing will continue
until the STAPLER OUT OF STAPLES
message appears on the printer
control-panel display.
1. Press the HELP ( ) button
for detailed information.
2. Press the U
P ARROW ()
button and the
D
OWN ARROW ( ) button to
step through the instructions.
3. If after following the
instruction above this error
persists, replace the staple
unit. See “To remove and
replace the stapler unit” on
page 60.
NOTE:
The customer is responsible for
ordering replacement staple
cartridges.
STAPLER OUT OF STAPLES
For help press
Note:
The stapler/stacker LED blinks in
amber (this error applies to the
stapler/stacker only).
Fewer than 15 staples remain in
the optional stapler/stacker. The
printer behavior depends on how
STAPLES OUT is configured.
● If STAPLES OUT=STOP, the
printer stops printing until you
refill the stapler or press the
S
ELECT ( ) button. This is the
default setting.
● If STAPLES OUT=CONTINUE,
printing continues but following
jobs will not be stapled.
1. Press the H
ELP ( ) button
for detailed information.
2. Press the U
P ARROW ()
button and the
D
OWN ARROW ( ) button to
step through the instructions.
3. Replace the staple cartridge.
4. If this error persists, Replace
the stapler unit (see “To
remove and replace the
stapler unit” on page 60)
followed by the
stapler/stacker if necessary.
TOO MANY PAGES IN JOB TO
STAPLE
Note:
The stapler/stacker LED is
continuously illuminated in green
(this error applies to the stapler/
stacker only)
The maximum number of sheets
the stapler can staple is 15. The
print job finishes printing but is not
stapled.
Reduce the number of pages in
the print job, or print and staple in
batches of 15 or fewer pages.
TOO MANY TRAYS INSTALLED
Turn power off and unistall a
tray.
Too many optional input trays are
installed. A maximum of two
optional trays is allowed.
Turn off the printer power and
remove a tray.
Table 41. Alphabetical printer messages (continued)
Message Description Action