- HP All-in-One Printer Manual

208 Removing and replacing parts Q2431-90912

500-sheet feeder media-size sensor

1. Remove the 500-sheet feeder PCA. See “500-sheet feeder control PCA” on page 207.

2. Remove two screws (callout 1).

Figure 169. 500-sheet feeder media-size sensor (1 of 2)

3. Push the locking tab (figure 169; callout 2) and slide the sensor toward the front of the feeder

to release it. Remove the sensor.

Figure 170. 500-sheet feeder media-size sensor (2 of 2)

Reinstall note When you install the media sensor, verify that the locator pins are correctly positioned in the

corresponding holes in the chassis.