- HP All-in-One Printer Manual

Q2431-90912 Chapter 6 Removing and replacing parts 167
Tray 2 media-size sensor
1. Remove the following assemblies:
● Top and right-side covers. See“To p cover” on page 146 and “Right-side cover” on
page 149.
● Formatter assembly. See “Formatter assembly” on page 161.
2. Unplug the sensor connector (callout 1). Remove two screws (callout 2).
Figure 106. Tray 2 media-size sensor (1 of 2)
3. Depress the locking tab (callout 3), and slide the sensor toward the front of the printer to
release it. Remove the sensor.
Figure 107. Tray 2 media-size sensor (2 of 2)
1
2
1
2
33