- HP All-in-One Printer Manual

154 Removing and replacing parts Q2431-90912
5. Rotate the paper guide down and away from the printer to release the left paper-guide hinge.
Figure 89. Tray 1 (5 of 6)
6. Slide the paper guide to the left to remove it.
Figure 90. Tray 1 (6 of 6)
Hint Tape the return spring in place on tray 1 so that you will not lose it.
Reinstall note When installing the tray 1 paper guide, hook the short end of the return spring in the small notch
located below the right-side hinge-pin receptacle.