Manualshelf

- HP All-in-One Printer Manual

ManualsBrandsHP ManualsAll in One PrinterHP Business Desktop Pro 4300 C9H70UT All-in-One Computer C9H70UT#ABA
161162163164165166167168169170
Q2431-90912 Chapter 6 Removing and replacing parts 141
Tray 2 feed rollers
1. Remove tray 2 and place it on a level work surface. Locate and open the cover (arrow) that is
next to the roller in tray 2.
Figure 65. Tray 2 feed rollers (1 of 4)
2. Pinch the blue latch that is on the left side of the roller. Slide the roller off of the shaft
(arrows).
Figure 66. Tray 2 feed rollers (2 of 4)
CAUTION When you install the roller, make sure that it locks into place. Verify that the roller is correctly
oriented, and that the round, black spacer next to the roller is correctly positioned against the
locking pin on the shaft (callout 1).
11