- HP All-in-One Printer Manual

140 Removing and replacing parts Q2431-90912
Tray 1 separation pad
Note If the optional envelope feeder accessory is installed, press the release button that is on the left
side and remove it. Then proceed to step 2.
1. Remove the front accessory cover (not shown). See Accessory covers and the tray 2
extension door on page 143.
2. Insert the tip of a a small flat-blade screwdriver under the tray 1 separation pad.
3. Carefully twist the screwdriver to dislodge the separation pad. Remove the tray 1 separation
pad.
Figure 64. Tray 1 separation pad