- HP ProOne 600 G1 All-in-One Printer Manual

Front bezel

Description Spare part number

Front bezel 732487-001

The front bezel is located on the front of the computer and is secured to the main system bracket with

eight Torx screws.

Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not

include a webcam, you must remove the shutter and install the webcam insert (Webcam assembly kit)

into the slot in which the webcam would otherwise be installed.

To remove the front bezel:

1. Prepare the computer for disassembly (see

Preparing to disassemble the computer on page 33).

2. Remove the access panel (see

Access panel on page 37).

3. Remove the stand (see

Stand on page 39).

4. Remove the lower panel (see

Lower panel on page 42).

5. Remove the optical drive (see

Replacing the optical disc drive on page 47).

6. Remove the VESA mounting adapter (see

VESA mounting adapter on page 43).

7. Remove the power supply (see

Power supply on page 75).

8. Remove the side panels (see

Side panels on page 73).

9. Remove the speakers (see

Speakers on page 71).

10. Remove the power button board (see

Power button board on page 87).

Front bezel