- HP ProOne 600 G1 All-in-One Printer Manual

Antenna
Description Spare part number
Antenna kit 698218-001
The antenna route from the WLAN card to the top of the computer.
To remove the antenna:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 33).
2. Remove the access panel (see
Access panel on page 37).
3. Remove the optical drive (see
Replacing the optical disc drive on page 47).
4. Remove the stand (see
Stand on page 39).
5. Remove the lower panel (see
Lower panel on page 42).
6. Remove the VESA mounting adapter (see
VESA mounting adapter on page 43).
7. Remove the power supply (see
Power supply on page 75).
8. Remove the side panels (see
Side panels on page 73).
9. Remove the speakers (see
Speakers on page 71).
10. Remove the system board (see
System board on page 78).
11. Remove the front bezel (see
Front bezel on page 89).
92 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis