Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 5-19
Address Table Commands
show bridge multicast filtering
The show bridge multicast filtering User EXEC mode command displays the multicast filtering
configuration.
Syntax
show bridge multicast filtering vlan-id
Parameters
n vlan-id — VLAN ID value.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the Multicast configuration for VLAN 1.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Forward-Unregistered Forward-All
Static Status Static Status
---- --------- --------- --------- ----------
e1 Forbidden Filter Forbidden Filter
e2 Forward Forward(s) Forward Forward(s)
e3 - Forward(d) - Forward(d)