Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 5-17
Address Table Commands
show bridge multicast address-table
The show bridge multicast address-table User EXEC mode command displays multicast MAC
address or IP address table information.
Syntax
show bridge multicast address-table
[vlan vlan-id] [address mac-multicast-address |
ip-multicast-address] [format ip |
format mac]
Parameters
n vlan-id — A valid VLAN ID value.
n mac-multicast-address — A valid MAC multicast address.
n ip-multicast-address — A valid IP multicast address.
n format ip|mac — Multicast address format. Can be ip or mac. If the format is unspecified,
the default is mac.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
A MAC address can be displayed in IP format only if it is in the range of
0100.5e00.0000-0100.5e7f.ffff.
Example
The following command displays Multicast MAC address and IP address table information.
Console# show bridge multicast address-table
VLAN MAC Address Type Ports
---- -------------- ------- ----------
1 01:00:5e:02:02:03 static e1
19 01:00:5e:02:02:08 static e1-e8
19 00:00:5e:02:02:08 dynamic e9-e11
Forbidden ports for multicast addresses:
VLAN MAC Address Ports
---- -------------- -----
1 01:00:5e:02:02:03 e8
19 01:00:5e:02:02:08 e8