Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

5-8 www.hp.com HP PC Blade Switch CLI Reference Guide
Address Table Commands
bridge aging-time
The bridge aging-time Global Configuration mode command sets the address table aging time.
To restore the default configuration, use the no
form of this command.
Syntax
bridge aging-time
seconds
no bridge aging-time
Parameters
n seconds — Time in seconds. (Range: 10-630 seconds)
Default Setting
The default is 300 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the bridge aging time to 250 seconds.
Console(config)# bridge aging-time 250