Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 28-13
VLAN Commands
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode
command discards untagged frames at ingress. To return to the default configuration, use the no
form of this command.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Parameters
There are no parameters for this command.
Default Setting
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following
commands configure Ethernet port e42 to discard untagged frames at ingress.
Console(config)# interface ethernet e42
Console(config-if)# switchport general acceptable-frame-type tagged-only