Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 28-1
28
VLAN Commands
vlan database
The vlan database Global Configuration mode command enters the VLAN Configuration mode.
Syntax
vlan database
Parameters
There are no parameters for this command.
Default Setting
Two VLANs are assigned in the VLAN database:
n VLAN 1
n VLAN 2
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following
command enters the VLAN database mode.
Console(config)# vlan database
console(config-vlan)#