Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 24-7
Syslog Commands
logging file
The logging file Global Configuration mode command limits syslog messages sent to the
logging file based on severity. To cancel using the buffer, use the no
form of this command.
Syntax
logging file level
no logging file
Parameters
n level — Specifies the severity level of syslog messages sent to the logging file. Possible
values: emergencies, alerts, critical, errors, warnings, notifications, informational and
debugging.
Default Setting
The default severity level is errors.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command limits syslog messages sent to the logging file based on severity level
alerts.
Console(config)# logging file alerts