Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 22-25
Spanning-Tree Commands
abort (mst)
The abort MST Configuration mode command exits the MST configuration mode without
applying the configuration changes.
Syntax
abort
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command exits the MST configuration mode without saving changes.
console(config) # spanning-tree mst configuration
console(config-mst) # abort