Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

22-24 www.hp.com HP PC Blade Switch CLI Reference Guide
Spanning-Tree Commands
exit (mst)
The exit MST Configuration mode command exits the MST configuration mode and applies all
configuration changes.
Syntax
exit
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command exits the MST configuration mode and saves changes.
console(config) # spanning-tree mst configuration
console(config-mst) # exit