Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

2-12 www.hp.com HP PC Blade Switch CLI Reference Guide
802.1x Commands
show dot1x
The show dot1x Privileged EXEC mode command displays the 802.1x status of the device or
specified interface.
Syntax
show dot1x [ethernet interface]
Parameters
n interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the status of 802.1x-enabled Ethernet ports.
Console# show dot1x
802.1x is enabled
Port Admin Mode Oper Mode Reauth Control Reauth Period Username
---- ---------- --------- ------- ------ --------
e1 Auto Authorized Ena 3600 Bob
e2 Auto Authorized Ena 3600 John
e3 Auto Unauthorized Ena 3600 Clark
e4 Force-auth Authorized Dis 3600 n/a
e5 Force-auth Unauthorized* Dis 3600 n/a
* Port is down or not present.
Console# show dot1x ethernet e3
802.1x is enabled.
Port Admin Mode Oper Mode Reauth Control Reauth Period Username
---- ---------- --------- ------- ------ --------
e3 Auto Unauthorized Ena 3600 Clark