Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

21-18 www.hp.com HP PC Blade Switch CLI Reference Guide
SNMP Commands
show snmp
The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
show snmp
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the SNMP communications status.
Console# show snmp
Community-String Community-Acce
ss
View Name IP Address
-------- ---------- --------- -------
public read only user-view All
private read write Default 172.16.1.1
private su DefaultSup
er
172.17.1.1
Community-string Group
Name
IP Address
---------------- ---------- ----------
public user-group all
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP
Port
Filter
Name
To
Sec
Retries
-------------- ----- --------- ------- ---- ------ --- -----
192.122.173.42 Trap public 2 162 15 3
192.122.173.42 Inform public 2 162 15 3