Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

20-12 www.hp.com HP PC Blade Switch CLI Reference Guide
RMON Commands
show rmon alarm
The show rmon alarm User EXEC mode command displays alarm configuration.
Syntax
show rmon alarm
number
Parameters
n number — Specifies the alarm index. (Range: 1-65535)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays RMON 1 alarms.
The following table describes the significant fields shown in the example:
Console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
Field Description
Alarm Alarm index.
OID Monitored variable OID.