Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 19-7
RADIUS Commands
radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS
response time when servers are unavailable. The command is used to cause the unavailable
servers to be skipped. To return to the default configuration, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
n deadtime — Length of time in minutes during which a RADIUS server is skipped over by
transaction requests. (Range: 0-2000)
Default Setting
The deadtime setting is 0.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the deadtime to 10 minutes.
Console(config)# radius-server deadtime 10